Wick & Weigh

Wax & fragrance · October 24, 2026

Scaling a candle batch up without running short or wasting wax

5 minute read

Glass jars of melted green and purple wax warming in a pot of hot water on a stove, one with a wooden stirring stick

Doubling a batch sounds like simple multiplication: twice the jars, twice the wax. In practice, a bigger pour day often brings new problems. The pitcher can’t hold the whole batch, a mix of jar sizes doesn’t scale evenly, the fragrance bottle runs out partway through, and a half-used bag of wax sits in the corner.

This is a step-by-step way to scale a pour day, using the pour day planner and real numbers. The example grows a mixed batch from 12 tumblers to 24.

The starting batch

Here is the planner’s own example, which we’ll call the small batch:

  • 12 tumblers poured to 6.5 oz of candle each
  • 6 tins poured to 3.4 oz each
  • 10 wax melt clamshells at 2.6 oz each
  • fragrance at 8% of the wax
  • 5% extra to cover what stays in the pitcher
  • a 4 lb pouring pitcher

The planner adds that up to 124.40 oz of finished candle. With 5% extra and the 8% load split out, that comes to 120.94 oz of wax (7.56 lb) and 9.68 oz of oil, poured as two pitcher loads of 60.47 oz of wax and 4.84 oz of oil each.

Step 1: change the jar counts, not the totals

The tempting shortcut is to double 7.56 lb and 9.68 oz. That only works if you double every row. In this example the tumblers double but the tins and melts stay the same, so the batch grows by less than double.

Enter the new counts instead: 24 tumblers, 6 tins, 10 melts. The planner now gives:

  • finished candle: 202.40 oz
  • wax: 196.78 oz (12.30 lb)
  • oil: 15.74 oz

Doubling the old totals would have given 15.12 lb of wax and 19.36 oz of oil, almost 3 lb of wax and more than 3.6 oz of oil you don’t need. Always recalculate from fill weights and counts.

Step 2: split into equal pitcher loads

12.30 lb of wax doesn’t fit in a 4 lb pitcher, so it has to go in batches. Three full pitchers and a small fourth would work, but the small one cools faster and is fiddly to measure. The planner instead divides the batch into four equal pours:

  • 4 pours of 49.19 oz of wax and 3.94 oz of oil

Equal pours keep every pitcher at the same fragrance ratio and behaving the same way, so the last jars come out like the first ones. The planner rounds the number of pours up, never down, so no pour is more than the pitcher holds.

Step 3: round the right way

Scales and recipes both invite rounding. A few rules keep it from hurting the batch:

  • Round each pour’s weights, not the load. Weigh 49.2 oz of wax and 3.94 oz of oil (or the gram figures) on a scale that reads to 0.1 oz or 1 g. Don’t round 8% to “about a tenth”.
  • Round wax and oil up, not down. A few tenths of an ounce extra end up as a melt or a test jar. A few tenths short means the last jar comes out under its fill weight.
  • Keep the oil with its own pour. Measure each pour’s oil into its own cup, so a slip in one pitcher doesn’t affect the next. Our pour day check shows how to weigh as you go.
  • Think before trimming the 5% extra. Without it, the 24-tumbler batch needs 11.71 lb of wax and 14.99 oz of oil, so the extra is only about 0.6 lb of wax. That is cheap insurance against a short final jar.

Step 4: buy in sizes that fit the batch

Now the shopping list meets the way wax and oil are actually sold. When we checked, CandleScience sold Golden Brands 464 soy wax as a 1 lb bag, a 10 lb bag or a 45 lb case, with the price per pound dropping at each size ($3.96, $3.20 and $2.41 a pound). Prices and stock change, so check before you order.

For 12.30 lb of wax, the options are:

Buy Wax Left over after this batch Cost at the listed prices
Two 10 lb bags 20 lb 7.7 lb $63.94
One 45 lb case 45 lb 32.7 lb $108.47
One 10 lb bag + three 1 lb bags 13 lb 0.7 lb $43.85

There is no single right answer. Buying close to the amount you need ties up the least money but costs the most per pound. A case only makes sense if you know you’ll pour the rest soon. Fragrance works the same way. If your oil comes in 16 oz bottles, a batch that needs 15.74 oz leaves almost no room for a spill, so either buy a little more or adjust the batch slightly.

CandleScience’s own batch calculator says the same thing: because of packaging sizes you may end up with extra materials, so keep them for your next batch.

Step 5: plan the leftovers before you pour

Leftover wax isn’t waste if you plan for it. Before the pour day:

  • Melts: the 5% extra and any rounding make enough for a few melt clamshells. The wax melt calculator shows how many melts the leftover makes.
  • Test jars: a leftover pour is a good time to make a jar for your next wick test, as long as it uses the same oil and load.
  • Next batch: store leftover wax sealed and labeled with the wax name and lot, so you don’t mix two lots without knowing.

Don’t put oil from one recipe into another recipe’s leftovers without recalculating the load for the combined wax.

Write the batch down once

Print the planner's pour sheet for the big batch and keep it with your notes. Next time you can change a few counts instead of starting from zero, and you'll know exactly what that day cost.

Honest limits

The amounts come from our calculators, and the pack sizes and prices from CandleScience’s listing when we checked. Your pitcher’s real working capacity, your wax and the temperature of your room all affect how a big pour day goes. Before your first big batch, run a smaller one with the same jars.

Sources

Work it out for your own candles

Pour Day PlannerCandle Wax Calculator

Photo credits: Kerin Gedge · Mustafi Numann · Allison Saeng · User_Pascal · Maria Kovalets · Roman Mesyancev · Mary Skrynnikova · Julee Juu · Abigail Ybarra on Unsplash