Wick & Weigh

Free printable · US Letter

Printable candle burn test log

One landscape page for testing three wicks side by side, with room for eight burn sessions.

Opens your browser’s print window. Choose “Save as PDF” there to keep a copy.

Wick & WeighBench sheet

Burn test log

WaxFragrance oil & loadDyeJar & inside widthPoured onCured (days)
A WickB WickC Wick
SessionDateHoursWick BWick C
Pool (in)FlameNotesPool (in)FlameNotes
1
2
3
4
5
6
7
8

Each session

Burn up to 4 hours, never unattended. Trim to about ¼ inch before relighting.

Look for

A full melt pool by the end of a session, a steady flame, no soot on the glass.

Stop when

About ¼ inch is left (supervised maker test), or the flame is too large, smokes or soots. Customers stop at ½ inch.

Keeper

Wick ____ because ______________

Sessions and ¼ inch test end: CandleScience burn test method. ½ inch consumer stop: National Candle Association. Never touch a hot jar.wickandweigh.com/printables/burn-test-log/

A fair wick test pours three candles from one batch, one with the chart size, one a size smaller and one a size larger, and burns them side by side. This log keeps those three candles on one page so you can compare them at every session instead of across scraps of paper. Get the three sizes from the printable wick size chart or let the wick test planner pick them.

What to write down

Fill in the recipe line at the top before the first burn, because a result is only useful later if you know what produced it. At each session note the hours burned, how wide the melt pool reached in inches, the flame height and anything you see: soot on the glass, mushrooming, tunneling or a jar that got very hot. Our guide on how to run a wick test explains what each reading tells you, and comparing two wick tests covers what to keep the same between tests.

Safety first

CandleScience’s burn test runs in sessions of up to four hours and ends, for a supervised maker test, at about a quarter inch of wax. The National Candle Association tells consumers to burn no more than four hours at a time and to stop with about half an inch left, which is the line for your care label. Never leave a test candle burning unattended, and let it cool completely before you move or weigh it.

More printables